FAQ's
- Q: Can Fluid Research equipment handle abrasives well?
- Q: I need to dose repeatedly-automatically; can Fluid Research do this?
- Q: I want to add a robot at a later date? Can Fluid Research equipment be upgraded in the field?
- Q: If I change my material in the future, what do I need to do?
- Q: I need to dose varying amounts, how does Fluid Research equipment help me do this?
- Q: If my viscosity varies, how does this affect Fluid Research equipment performance?
- Q: Can my PC control Fluid Research equipment?
- Q: Why do I want a Progressing Cavity Pump instead of the others available?
- Q: I need a test system; can Fluid Research help me?
- Q: How does Fluid Research provide service after I take delivery?
- Q: What makes Fluid Research better than any other meter mix dispensing manufacturer?
- Q: I am looking into converting to meter mix dispensing; is there really a cost savings?
- Q: Do you offer non-customized meter mix machines?
- Q: I currently use a stick and a bucket for my dispensing, why should I upgrade?
- Q: Why is Contract Manufacturing so important? I designed the product and I can assemble it too
- Q: What is Meter, Mix, and Dispensing?
- Q: What is encapsulation?
- Q: What is potting?
- Q: What is Thixotropy and how does it apply to my needs?
- Q: Why would I need a filler in my material?
- Q: Why is Material Handling key to my product?
- Q: How does a Progressing Cavity pump work?
- Q: What shot sizes and type of shots you can dispense?
- Q: Is continuous flow possible?
- Q: Do you feature material heating, agitating, etc?
- Q: Can this unit be mobile?
- Q: How accurate are Meter, Mix, Dispense systems?
Q: Can Fluid Research equipment handle abrasives well?
A: Yes, Fluid Research Corporation features the only technology to precisely handle abrasive materials with precision while minimizing any wear.
Q: I need to dose repeatedly-automatically; can Fluid Research do this?
A: Yes, our machines are engineered to automatically dose accurately and repeatedly; some can even be programmed for specific renditions.
Q: I want to add a robot at a later date? Can Fluid Research equipment be upgraded in the field?
A: Yes, we design dispensing solutions anticipating your needs will change as you grow, from SCARA robotics to integrating cameras, we can work with you to provide a solution for today and tomorrow!
Q: If I change my material in the future, what do I need to do?
A: All Meter, Mix and Dispense systems are manufactured to your exact specification; if you change your material; we can work with you to provide the solution for your equipment, allowing you to dispense your new material with ease!
Q: I need to dose varying amounts, how does Fluid Research equipment help me do this?
A: All Fluid Research Corporation's Meter, Mix and Dispense systems can be designed to accommodate varying shot sizes. Simple keystrokes enable dose variations and storage for easy "no tools required" adjustments.
Q: If my viscosity varies, how does this affect Fluid Research equipment performance?
A: Proper material preparation is key to accurate, reliable and consistent results, Fluid Research Corporation offers a myriad of features to ensure your product is conditioned and maintained at par levels to ensure no fluctuation in viscosity.
Q: Can my PC control Fluid Research equipment?
A: We pride ourselves on our ability to provide a solution to your needs. If you need PC control from a remote location, we can create a solution that will perform as you need, from touch screens to networked configurations; we have the experience and ability to create a solution for your needs.
Q: Why do I want a Progressing Cavity Pump instead of the others available?
A: Our Progressing Cavity pumps offer flexibility, repeatability and less down time. We design our pumps around your material's requirements and create a solution custom made for your material's characteristics - giving you the most precise dispense possible.
Q: I need a test system; can Fluid Research help me?
A: Although we'd like you to see for yourself the cost and labor savings experienced when you automate, we are only able to offer test systems on a limited basis. Contact us with your needs and we will do everything possible to create a scenario where you can see firsthand the benefits of automation.
Q: How does Fluid Research provide service after I take delivery?
A: Fluid Research Corporation ensures reliability, accuracy and dependability in many forms. From wet testing in our facility to ensure the equipment performs as promised to training and field service managers, each with ten or more years experience, we can solve anything brought to us!
Q: What makes Fluid Research better than any other meter mix dispensing manufacturer?
A: We manufacture your dispensing equipment to your exacting standards, from Progressing Cavity pumps to material temperature. We listen to your needs (both material and dispensing application) and create a solution that excels both in dependability and accuracy.
Q: I am looking into converting to meter mix dispensing; is there really a cost savings?
A: In a word…YES! Some customers have realized their cost savings in a matter of two months. From labor savings, cleanup, waste, reliability to OSHA regulations, the savings are immediate - you'll ask yourself"Why didn't we automate earlier?"
Q: Do you offer non-customized meter mix machines?
A: Yes, we offer base products and can customize them from that point.
Q: I currently use a stick and a bucket for my dispensing, why should I upgrade?
A: There are many reasons you want to automate from stick and bucket to Meter, Mixing, and Dispensing. From exposure to toxic fumes when mixing materials to cleanup, our Meter, Mix, and Dispense units alleviate many OSHA and EPA concerns.
Q: Why is Contract Manufacturing so important? I designed the product and I can assemble it too
A: If you have a short-term need for manufacturing a product, Fluid Research Corporation offers this service to you; giving you a product that you can be assured is consistent with your needs; freeing you to dedicate your time to selling your product.
Q: What is Meter, Mix, and Dispensing?
A: The process of precisely measuring, blending and controlling the movement of reactive materials. You can equate Meter, Mix and Dispensing to baking two cakes - when the ingredients are measured, mixed and poured correctly, the cakes will rise, look the same, and taste great (consistency, repeatability and accuracy), any variance and you have two cakes that do not taste the same, or even worse, you have a cake that tastes bad. Applying this to Meter, Mix and Dispensing: automation provides the qualities you need - consistency, repeatability and accuracy.
A: The process of enclosing your product in a reactive material such as epoxy to protect and preserve the components.
A: The process of embedding into a container with an insulating or protective material. (Also Vacuum Potting / Encapsulation)
Q: What is Thixotropy and how does it apply to my needs?
A: Thixotropic materials reduce in viscosity when stirred or under pressure. A common Thixotropic material is Ketchup. When static, it is thick and viscous, when stirred, it is easy to pour.
Q: Why would I need a filler in my material?
A: Fillers serve many purposes, from decreasing the amount of material needed to increasing conductivity; fillers are necessary for certain applications. Our systems handle Soft fillers used in extending materials or Mechanical & Thermal fillers used for material property enhancement.
Q: Why is Material Handling key to my product?
A: Proper material preparation and processing yields consistent results. The key to consistency and repeatability is found in the conditioning of materials. We provide systems to address aspect of material conditioning equipment available to ensure you dispense a consistent quality product.
Q: How does a Progressing Cavity pump work?
A: A Brief explanation is that a Progressing Cavity pump incorporates the use of a rotating single helix drive device, housed in a static double helix elastomer stationary device. The path formed creates cavities for material to flow through. The pump works by moving materials through these cavities in an endless motion.
Q: What shot sizes and type of shots you can dispense?
A: Shot sizes can vary from the smallest amount you can imagine to continuous flowing. Whatever your needs, Fluid Research Corporation can accommodate your requests.
Q: Is continuous flow possible?
A: Yes, we are one of few providers who can offer continuous flow with no pulsation.
Q: Do you feature material heating, agitating, etc?
A: Yes, we evaluate your specific needs and provide a solution created for your specific application. If your product needs to be dispensed at a specific temperature, or if it needs degassing, we will provide a solution.
A: Yes, we have designed and built systems varying in size from cart-mounted to incorporation into large-scale prototyping. Whatever your needs are, we will create a solution for your needs.
Q: How accurate are Meter, Mix, Dispense systems?
A: Our primary goal at Fluid Research Corporation is dependability and repeatability. We can design a system to meter any ratio you need. If you've been told it can't be done, contact us. WE CAN DO IT!